| |
|
|
|
|
Specific |
Cure |
Gap |
Tensile Shear |
| |
|
|
|
|
Gravity @ |
Speed |
Fill |
Strength |
| Product |
Description |
Temperature Range of Use |
Viscosity (cps) |
25°C/77°F |
(SEC) |
(inch) |
(steel) |
| CP-100 |
High impact resistant products especially formulated for bonding |
-54°C to 82°C/-65°F to 180°F |
80-120 |
1.03 |
10-30 |
.005 |
3667 |
| |
plated surfaces to themselves and other materials. |
|
|
|
|
|
|
|
|
|
| HI-50 |
Formulated to contribute toughness and impact resistance. |
-54°C to 93°C/-65°F to 200°F |
30-70 |
1.07 |
5-20 |
.004 |
5000 |
| HI-150 |
Recommended for bonding plastic and rubber together or to |
-54°C to 93°C/-65°F to 200°F |
100-200 |
1.07 |
10-30 |
.005 |
5000 |
| HI-500 |
metals, especially aluminum. |
|
|
|
-54°C to 93°C/-65°F to 200°F |
400-600 |
1.09 |
30-50 |
.008 |
5000 |
| HP-10 |
Exhibits high T-peel strength, impact strength (impact |
|
-54°C to 82°C/-65°F to 180°F |
5-15 |
1.05 |
2-10 |
.002 |
2556 |
| HP-500 |
resistance), and thermal shock resistance. Excellent |
|
-54°C to 127°C/-65°F to 260°F |
400-600 |
1.05 |
30-50 |
.012 |
2840 |
| HP-3000 |
performance for metal to metal applications. |
|
|
-54°C to 127°C/-65°F to 260°F |
2500-4500 |
1.05 |
35-60 |
.020 |
3124 |
| HP-5000 |
|
|
|
|
|
|
-54°C to 127°C/-65°F to 260°F |
4000-6000 |
1.05 |
60-120 |
.025 |
3408 |
| MR-10 |
Specially formulated to resist moisture and humidity while |
|
-54°C to 127°C/-65°F to 260°F |
6-12 |
1.05 |
2-10 |
.002 |
3140 |
| MR-290 |
retaining tensile shear strength, impact strength, and heat |
-54°C to 127°C/-65°F to 260°F |
250-350 |
1.05 |
10-30 |
.012 |
2850 |
| MR-3000 |
resistance. |
|
|
|
|
-54°C to 127°C/-65°F to 260°F |
2500-3500 |
1.05 |
35-60 |
.020 |
2840 |
| NO-20 |
No odor, no frost for applications where appearance is critical. |
-54°C to 93°C/-65°F to 200°F |
5-35 |
1.05 |
10-30 |
.005 |
2167 |
| NO-150 |
These products are virtually odor free, and frosting (known as |
-54°C to 93°C/-65°F to 200°F |
100-200 |
1.07 |
30-50 |
.006 |
1440 |
| |
blooming or chlorosis) is virtually non-existent. |
|
|
|
|
|
|
|
|
|
| PX-5 |
Provides maximum strength for bonding various plastics and |
-54°C to 93°C/-65°F to 200°F |
2-10 |
1.04 |
2-10 |
.002 |
3223 |
| PX-50 |
elastomers together or to other materials. |
|
|
-54°C to 93°C/-65°F to 200°F |
30-80 |
1.04 |
5-20 |
.004 |
3182 |
| PX-500 |
|
|
|
|
|
|
-54°C to 93°C/-65°F to 200°F |
400-600 |
1.04 |
30-50 |
.008 |
3309 |
| RX-5 |
Non-surface sensitive adhesives for porous, acidic, contaminated, |
-54°C to 82°C/-65°F to 180°F |
2-10 |
1.05 |
2-10 |
.002 |
3467 |
| RX-50 |
or hard to bond surfaces, such as certain plastics and plated |
-54°C to 82°C/-65°F to 180°F |
30-70 |
1.05 |
5-20 |
.004 |
4173 |
| RX-100 |
surfaces. |
|
|
|
|
|
-54°C to 82°C/-65°F to 180°F |
80-120 |
1.06 |
10-30 |
.005 |
4000 |
| RX-500 |
|
|
|
|
|
|
-54°C to 82°C/-65°F to 180°F |
400-600 |
1.06 |
30-50 |
.008 |
5133 |
| RX-700 |
|
|
|
|
|
|
-54°C to 82°C/-65°F to 180°F |
600-800 |
1.06 |
35-60 |
.010 |
6800 |
| RX-Gel |
|
|
|
|
|
|
-54°C to 82°C/-65°F to 180°F |
45,000-85,000 |
1.08 |
60-120 |
.020 |
6533 |
| TX-5 |
Specifically designed for use on parts that will be exposed to high |
-54°C to 149°C/-65°F to 300°F |
2-10 |
1.05 |
2-10 |
.002 |
3133 |
| TX-100 |
temperatures, such as wire tacking to circuit boards prior to or |
-54°C to 149°C/-65°F to 300°F |
80-150 |
1.05 |
10-30 |
.004 |
5400 |
| TX-750 |
after wave soldering. |
|
|
|
|
-54°C to 149°C/-65°F to 300°F |
650-850 |
1.05 |
30-50 |
.010 |
4133 |
|
TX-2000
|
|
|
|
|
|
|
-54°C to 149°C/-65°F to 300°F
|
1800-2400
|
1.05
|
35-60
|
.015
|
6267 |
